Car Racks

Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.

DrTray is the ultimate tray rack for your hitch. It can easily handle road, mountain, and fat-tire bikes with up to 5” tires. Bike clearance is top notch, with 18” between the trays. To make it even better, the bike tray spacing can be adjusted tool-free while the bikes are loaded, virtually eliminating any issues with bike-to-bike interference. The ergonomic remote tilt lever is intuitive to use and allows quick access to the rear of the vehicle as well as a convenient carrying handle. Its locking SpeedKnob delivers simple and secure vehicle attachment, and exceptional bike theft protection is built in with a burly SKS cable lock system. Plus, DrTray is adaptable – add an EZ+1 to carry a third bike! - Weighs in at only 34 pounds– the lightest rack in its class. (2” receiver Model only) - Securely carries 26” to 29” wheels and tires up to 5” wide - Unrivaled spacing between bikes - up to 18” between each bike - Tool-free adjustment while bikes are loaded minimizes the potential for bike-to-bike interference - Easy-to-use remote tilt lever and lightweight, aluminum design makes raising and lowering the rack a breeze - Tool-free locking SpeedKnob for a secure and easy install to your vehicle - Extra burly SKS cable lock system for each bike secures both wheels and frame - Add the EZ+1 and carry a third bike (2” receiver model only, sold separately) TECHNICAL SPECS - Weight: 34.00 lbs - Dimensions: L 16.00” x W 54.00” x H 11.50”

This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Swagman's Cross-Country Rack makes it easy to transport up to 4 bikes. Simply lift a bike into the wheel holders, secure the ratcheting arm over the frame, and strap in the wheels. The trays can be adjusted to offset the bikes for a convenient fit. The XTC rack is made of steel for excellent stability and durability, features adjustable wheel holders to fit different bike types, and the rack's center arm folds down so you can access your vehicle.

A modern two-bike tray rack utilizing an easy to load platform. Wide wheel trays and high quality ratchet straps securely hold two bikes. Put Your Bikes On. Go Play. Finally, a modern 2-bike tray rack that's as intuitive as it is affordable. Featuring adjustable arms capable of carrying a wide array of bike styles and sizes, the All Star securely transports two bikes, up to 45 pounds each—that's 90 pounds total! Plus, the combination of the All Star's easy to load platform, wide wheel trays and high-quality ratchet straps means fast and secure loading, so you can focus on riding your bike. As for hatch access? Not a problem. Just unload your bikes and fold down the All Star's mast to grab that "one last thing." And like all Saris racks, the All Star hitch rack is made in the USA and is backed with a lifetime warranty. Product Features - Carries 2 bikes, up to 45 pounds each - Easy-to-load platform and wide wheel trays cut down on bike loading time - Adjustable arms securely transport a variety of bike sizes and styles - Mast folds down to provide hatch access when not loaded with bikes Product Design - Tray style hitch rack - Universal hitch works with 1-1/4" and 2" hitch receivers - Wheel trays adjust to hold variety of bike sizes and frame types - Ratcheting wheel strap securely holds tires up to 3" - Adjustable arm and padded hooks secures bike frame - Center arm folds down for access to rear of vehicle when not loaded with bikes - Rack weight: 21lb

Simple. Reliable. American-Made. This entry-level 3-bike trunk rack gets you where you want to go. No frills, no complications—the Guardian is as simple as can be, without sacrificing security. Easy-to-use bike hold downs with ratcheting straps grip the bike's frame, while rack straps equipped with spring-loaded buckles ensure a snug rack-to-vehicle fit to keep precious cargo secure during transit. Plus, the Guardian 3-bike comes completely assembled and ready to go, right out of the box. What more could you ask for in a bike rack? Features - Carries 3 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Trunk bike rack. - No assembly needed. - Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes. - Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit. - Rack arms adjust to fit most sedans, hatchbacks and vans - American-made steel frame construction. - Folds for compact, convenient storage. - Coated hooks protect vehicle's finish. - Heavy-duty foam pads protect vehicle's finish.

Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Kuat's Beta is a lean, mean rack that carries two bikes (up to 80 lbs. total capacity) and weighs in at just under 14 lbs. - Carries 2 bikes (up to 40 lbs. each) - Total carrying capacity of up to 80 lbs. - Folds up quickly for storage - Tilts down for easy vehicle access - Enhance the Beta with hitch lock system (sold separately) - Hand-tight cam system - no need for additional tools! - Anti-sway carriages for a smooth ride - Aluminum construction is lightweight and extremely durable - Gun Metal Gray powder coat finish - 2-inch weighs only 12 lbs. (lightest weight on the market) - 1.25-inch weighs only 14 lbs. (additional 2lbs due to steel lower end) - Available for 2-inch OR 1.25-inch receivers. The 1.25-inch Beta can fit either hitch size with the 1.25-inch to 2-inch adapter.

The 1-1/4" locking hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.

The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.

A fork hitch for bike transportation that allows for versatile mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: - 15 x 110 mm (Boost, silver insert) - 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) - 15 x 142 mm (Salsa + others) - 15 x 150 mm (Rock Shox Bluto Fork + others) - 20 x 110 mm

The EVOC TAILGATE PAD is our pickup pad for safe bike transport on your pickup-truck for up to 6 bikes. It combines secure bike fixation and tailboard damage protection in one piece. Made from durable 600 weight Denier, we added a polyurethane coating to make it resistant for the weather that you'll inevitably encounter while you're out shredding. The updated Tailgate pad is equipped with molded foam separations blocks and straps to keep your toys from touching. We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame. Features - Padded pickup tailgate protection - Ideal for shuttling bikes - particularly MTBs - Quick access to tailgate release handle - Fold-Away flap for rear camera (Olive/Black and Black/Olive only) Specifications - Weight: 1850 g (Size M/L), 2300 g (Size XL) - Material: P 600/D PU coated, Tarpaulin - Black/Olive & Olive/Black Sizes: M/L- 136 x 85 x 2 cm , XL 160 x 100 x 2 cm - Colors: Black/White, Black/Olive, Olive/Black Sizes Two sizes are available (M/L & L/XL). Use the M/L for trucks like the Toyota Tacoma, Nissan Frontier, Chevrolet Canyon, Ford Ranger and other compact trucks. Use the L/XL for full-size trucks like the Toyota Tundra, Nissan Titan, Chevrolet Silverado, Ford-F150, Dodge Ram, etc.

- Holds and covers up to 6 bikes to protect them as well as the tailgate from scratches and damages during bike transport - Padding is cut-resistant, water resistant and UV-stable - Non-slip protection (padded) - Quick-access tailgate release - Soft lining on the truck side of the pad, won't damage paint - Size: full-size truck (XL) or mid-size truck (ML) - Specifically designed for pickup trucks with curved tailgates - ML, Fits tailgates 130cm/50'' wide - XL, Fits tailgates 160cm/60'' wide

12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.

Sleek and strong, the BedRock HD’s low profile delivers a 300-lb. on-road capacity and Yakima's exclusive new Off-Road Rating for up to 180 lbs. all without the need to drill into the truck bed. Pair it with the HD Bar length that best fits the bed to carry bikes, skis, cargo boxes or the SkyRise Rooftop Tent all while preserving valuable cooler-carrying capacity underneath (HD Bar sold separately). This powerhouse truck rack provides strength and security, easily-accessible tie-down points, and T-slot attachment capability that makes adding gear easy. Product Details: - Easy to reach low profile height position makes it easy to rack out and reach gear - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Simple, tool-free attachment makes installation, removal and crossbar spread adjustments a breeze - Best-in-class, maximum on-road rating of 300 lbs. - Maximum off-road rating of 180 lbs. - Built to last, with engineered aluminum construction and durable powder-coat finish - Integrated tie-down points on end-caps of HD Bar make securing any load quick and simple - T-slot attachments make adding gear mounts and accessories fast and easy - Designed and tested for all common truck beds - Integrated SKS (Same Key System) locks the rack system to the truck bed - Suggested mounts and accessories: Bike Mounts, Cargo Baskets, SkyRise Tent, Wear Strips, Eye Bolts, BigCatch Fishing Kayak Saddles Product Specs: - Weight: 8.01 lbs - Dimensions: L 5.50in x W 4.25in x H 7.00in - Some assembly required, 30 minute install

Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars

Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.

Whether you're tinkering on your gear, prepping a meal for your crew, or mixing drinks for a night of fun, the EXO BackDeck is the perfect solution, turning your EXO system from gear hauler to working surface to bar top in seconds. When you're done, simply stow it and get back on the road. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - 50" x 17" UV protected bamboo work surface - Tool-free, locking SpeedKnobs attach and lock EXO BackDeck to EXO SwingBase or EXO TopShelf - Included bag protects the tabletop when not in use and makes for easy transport - Sized to store inside the EXO GearLocker or EXO GearWarrior - 80lb weight capacity - 1 Year Warranty - Not intended to be used as a cutting surface - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 10.80 lbs. - Dimensions: L 17.00 in x W 50.50 in x H 0.75 in - Limited One Year Warranty

The two-bike EXO DoubleUp attaches directly to the EXO SwingBase, or to the second tier EXO TopShelf, allowing room for an EXO GearLocker or EXO GearWarrior below. Either way, it's super-easy access that accommodates anything you're riding—fat tires to road bikes and everything in between. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Carries 2 bikes up to 50 lbs. each when mounted on EXO SwingBase - Carries 2 bikes up to 40 lbs. each when mounted on EXO TopShelf - Tool-free, locking SpeedKnobs attach and lock EXO DoubleUp to EXO SwingBase or TopShelf - Use SKS Lock cores included with EXO SwingBase or EXO TopShelf for added bike security - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 37.15 lbs. - Dimensions: L 26.60 in x W 72.00 in x H 7.00 in - Limited Lifetime Warranty

The EXO GearLocker gives you the functionality of a legendary Yakima roof-top cargo box with hitch-mounted ease-of-access. Easy on-and-off makes it perfect for hauling gear from your car to the campsite, the beach, or anywhere else you need your gear on-hand. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system? - 10 Cubic Feet of Storage Space - Wide-angle opening makes placing or finding your gear easy - Rugged and lightweight - Tool-free, locking SpeedKnobs attach and lock EXO GearLocker to EXO SwingBase or EXO TopShelf - SKS Lock included for added gear security - No assembly required - 100lb gear weight limit when mounted on EXO SwingBase - 80lb gear weight limit when mounted on EXO TopShelf - 2 Year Warranty - Made in the USA - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 27.80 lbs. - Dimensions: L 60.00 in x W 23.00 in x H 16.00 in - Limited Lifetime Warranty

Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty

Organize and stow your camp kitchen gear with this all-in-one system, simplifying your effort so it’s always ready to grab-and-go. The rugged, road-worthy box can seamlessly attach to the EXO System for smooth transport to your campsite, trailhead, or ball game. Open it up and turn it into a fully functional work station, making it easy to prep, cook, and serve from the same spot. The system can also be expanded with side-mounted tables and a free-standing Leg kit to grow and customize your EXO OpenRange as needed. PRODUCT DETAILS - Connects to the EXO SwingBase or EXO TopShelf in seconds using the included EXO cleat system - Durable rotomolded enclosure with a rubber door seal keeps your gear fully protected from weather, dust, and critters - Fold down front door allows easy access to your gear and can be used as a prep surface - Internal shelf and integrated utensil drawer help to organize your cooking and camp gear - 85 liters (90 quarts) of internal storage space - Includes SKS locking latches to secure your gear - Tool-free, locking SpeedKnobs attach and lock EXO OpenRange to EXO SwingBase or EXO TopShelf - Includes a lantern hook, backboard organizer and handheld bottle opener - Full suite of accessories available to expand your EXO OpenRange - EXO SwingBase and EXO TopShelf recommended but not required for transport - Made in the USA PRODUCT SPECS - Weight: 37.00 lbs. - Dimensions: L 31.00 in x W 18.00 in x H 18.00 in - Limited Lifetime Warranty

Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in